Osmotec Disc Tube technology is an state of the art type of RO specially optimized for Reuse processes. the module consists of a stack of molded ABS spacing discs separating membrane cushions, which are formed from three octagonal layers. These are welded to each other, ultrasonically, at their periphery. find more about our


Disc Tube Reverse Osmosis Technology

osmotec's DTRO technology

The specialized DTRO is used for highly polluted waste water treatment / reuse with high efficiency and can handle high TDS, COD, BOD in the effluent.

The module is vertically mounted with octagonal membrane cushions and round hydraulic disc (ABS). It is an open channel feed flow system and can take higher TSS / SDI. Permeate is taken out from the centre from each individual membrane cushion. The module has top & bottom end flanges with Lip seals. The outer cover comprises of FRP vessel.

  • Can handle high TDS, COD, BOD, SDI
  • Offer Higher Recovery
  • Higher Pressure available 60,75, 90, 120 Bar
  • Less susceptible to fouling and scaling
  • Modules are easy to clean & maintain
  • Easy Replacement of Membrane cushions
  • Effluents in
    • Pharma & Chemicals
    • Distilleries & Breweries
    • Textiles
    • Tanneries
    • Dyes & Pigments
    • Pesticides & Fertilizers
    • Automobiles & Paints
    • Distilleries & Breweries
    • Electroplating
    • Starch
    • Refineries & Petrochemicals
  • Existing RO rejects
  • Leachate
  • Desalination
  • Brackish Water/ Grey Water/ Ground Water